Thanks to their multiplexing technology, iDatastart remotes can pack over 30 functions using only 5 buttons. In order to get the most out of your remotes, please take a moment to get acquainted with the following functions below:
NOTES:
1. All functions must be enabled by an Authorized Dealer during installation to be functional on remote
2. Non-highlighted icons = Press & release button
3. Highlighted (grey) icons = Press & hold button for 2.5 seconds
4. Coma (,) between icons = Press buttons one after the other
5. Plus (+) between icons = Press buttons together
6. Timeout between each button press = 3 seconds
7. Function* = Available in 2nd Car Mode
| COMMAND | Lock & Arm* |
|---|---|
| BUTTON |  |
| DESCRIPTION | Secures your vehicle by locking the doors and arming the alarm. |
| CONFIRMATION | 1 chime + 1 flash |
| COMMAND | Unlock & Disarm |
|---|---|
| BUTTON |  |
| DESCRIPTION | Accesses your vehicle by unlocking the doors and disarming the alarm. |
| CONFIRMATION | 2 chimes + 2 flashes |
| COMMAND | Query* |
|---|---|
| BUTTON |  |
| DESCRIPTION | Queries vehicle and vehicle battery voltage and interior temperature. |
| COMMAND | Panic* |
|---|---|
| BUTTON |  |
| DESCRIPTION | Triggers the panic siren. |
| CONFIRMATION | 1 chime + 1 flash |
| COMMAND | AUX 5* |
|---|---|
| BUTTON |  |
| DESCRIPTION | To be completed by Authorized Dealer if applicable |
| COMMAND | Trunk Release* |
|---|---|
| BUTTON |  |
| DESCRIPTION | Releases the trunk or hatch. |
| COMMAND | Engine Start/Stop* |
|---|---|
| BUTTON |  |
| DESCRIPTION | Starts and stops the engine. |
| CONFIRMATION | 4 chimes + 4 flashes (Button LEDs will also flash intermittently while engine is running) |
| COMMAND | AUX 1 |
|---|---|
| BUTTON |   |
| DESCRIPTION | To be completed by Authorized Dealer if applicable |
| COMMAND | AUX 2 |
|---|---|
| BUTTON | |
| DESCRIPTION | To be completed by Authorized Dealer if applicable |
| COMMAND | AUX 3 |
|---|---|
| BUTTON |  |
| DESCRIPTION | To be completed by Authorized Dealer if applicable |
| COMMAND | AUX 4 |
|---|---|
| BUTTON | |
| DESCRIPTION | To be completed by Authorized Dealer if applicable |
| COMMAND | 2nd Car Mode |
|---|---|
| BUTTON | * |
| DESCRIPTION | Controls two iDatastart-equipped vehicles using one remote. Works with all functions marked with an asterisk (*). |
| COMMAND | Silent Lock* |
|---|---|
| BUTTON | |
| DESCRIPTION | Disables the vehicle’s horn and alarm siren. |
| COMMAND | Silent Unlock* |
|---|---|
| BUTTON | |
| DESCRIPTION | Disables the vehicle’s horn and alarm siren. |
| COMMAND | Valet Mode ON/OFF |
|---|---|
| BUTTON |  |
| DESCRIPTION | Turns off remote start and security features when servicing your vehicle or valet parking. Keyless entry features remains functional. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Runtime Extend |
|---|---|
| BUTTON | |
| DESCRIPTION | Seamlessly extends your engine runtime without restarting your vehicle. |
| COMMAND | Mute ON/OFF |
|---|---|
| BUTTON | |
| DESCRIPTION | Disables the vehicle’s horn and alarm siren even when alarm is triggered. Remote will still receive alarm notification. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Ignition Lock ON/OFF |
|---|---|
| BUTTON | |
| DESCRIPTION | Automatically locks doors when engine is running. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Passive Lock & Arm ON/OFF |
|---|---|
| BUTTON | |
| DESCRIPTION | Automatically locks and arms your vehicle 60 seconds after you unlock it. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Turbo ON/OFF |
|---|---|
| BUTTON | |
| DESCRIPTION | Cools down your turbo before turning the engine off. Programmable runtime from 30 seconds to 4 minutes. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Weather Start ON/OFF |
|---|---|
| BUTTON | |
| DESCRIPTION | Sets your vehicle to automatically remote start every 2, 3 or 4 hours (programmable) or from a temperature sensor sold separately. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Mute Remote ON/OFF |
|---|---|
| BUTTON | |
| DESCRIPTION | Disables the chime when pressing any button on your remote. |
| CONFIRMATION | •1 chime ON •2 chimes OFF |
| COMMAND | Factory Reset |
|---|---|
| BUTTON | |
| DESCRIPTION | The factory reset must be done to enable Bluetooth paring with the iDatalink Phone app. |
| COMMAND | Power OFF Remote |
|---|---|
| BUTTON |  |
| DESCRIPTION | Turns OFF the remote. |
| COMMAND | Power ON Remote |
|---|---|
| BUTTON | |
| DESCRIPTION | By default, the remote is OFF inside the packaging. Press and hold the “F” button to turn ON the remote. |