In order to get the most out of your iDatastart remote, please take a moment to get acquainted with the following commands and confirmations below:
NOTES:
1. All functions must be enabled by an Authorized Dealer during installation to be functional on remote
2. Non-highlighted icons = Press & release button
3. Highlighted (grey) icons = Press & hold button for 2.5 seconds
4. Coma (,) between icons = Press buttons one after the other
5. Plus (+) between icons = Press buttons together
6. Timeout between each button press = 3 seconds
7. Function* = Available in 2nd Car Mode
8. 3 chirps following a remote command = Option not available. Contact your Authorized Dealer.
POWER ON REMOTE
| COMMAND |
Power ON Remote |
| BUTTON |
 |
| DESCRIPTION |
Turns remote on. |
POWER OFF REMOTE
| COMMAND |
Power OFF Remote |
| BUTTON |
  |
| DESCRIPTION |
Turns remote off to save battery life. |
LOCK AND ARM*
UNLOCK AND DISARM*
| COMMAND |
Unlock & Disarm |
| BUTTON |
 |
| DESCRIPTION |
Accesses your vehicle by unlocking the doors and disarming the alarm. |
| CONFIRMATION |
• 2 chirps, display  and  |
QUERY*
| COMMAND |
Query* |
| BUTTON |
 |
| DESCRIPTION |
Queries vehicle and vehicle battery voltage and interior temperature. |
| CONFIRMATION |
• Query voltage: 1 chirp, display voltage ex:  for 3 seconds.
• Query temperature: 1chirp, display temperature ex:  for 3 seconds.
• Query shut down error: 3 chirps, display error ex:  for 3 seconds. |
PANIC*
| COMMAND |
Panic* |
| BUTTON |
 |
| DESCRIPTION |
Triggers the panic siren. |
| CONFIRMATION |
• 1 chirp,  and  flash 5 times.
|
AUX 5*
| COMMAND |
AUX 5* |
| BUTTON |
 |
| DESCRIPTION |
To be completed by Authorized Dealer if applicable |
| CONFIRMATION |
• 1 chirp, display 
|
TRUNK RELEASE
| COMMAND |
Trunk Release* |
| BUTTON |
 |
| DESCRIPTION |
Releases the trunk or hatch. |
| CONFIRMATION |
• 1 chirp, display 
|
ENGINE START/STOP*
| COMMAND |
Engine Start/Stop* |
| BUTTON |
 |
| DESCRIPTION |
Starts and stops the engine. |
| CONFIRMATION |
• Engine start: 1 chirp.
• Engine run: 4 chirps, display  and remaining runtime.
• Start error: 1 long chirp, display start error ex:  +  for 3 seconds.
• Engine stop: 2 chirps. |
AUX 1
| COMMAND |
AUX 1 |
| BUTTON |
 |
| DESCRIPTION |
To be completed by Authorized Dealer if applicable |
| CONFIRMATION |
• 1 chirp, display 
|
AUX 2
| COMMAND |
AUX 2 |
| BUTTON |
|
| DESCRIPTION |
To be completed by Authorized Dealer if applicable |
| CONFIRMATION |
• 1 chirp, display  |
AUX 3
| COMMAND |
AUX 3 |
| BUTTON |
 |
| DESCRIPTION |
To be completed by Authorized Dealer if applicable |
| CONFIRMATION |
• 1 chirp, display 
|
AUX 4
| COMMAND |
AUX 4 |
| BUTTON |
|
| DESCRIPTION |
To be completed by Authorized Dealer if applicable |
| CONFIRMATION |
• 1 chirp, display 
|
2ND CAR MODE
| COMMAND |
2nd Car Mode |
| BUTTON |
* |
| DESCRIPTION |
Controls two iDatastart-equipped vehicles using one remote. Works with all functions marked with an asterisk (*). |
| CONFIRMATION |
• Same as 1st car.
|
SILENT LOCK*
| COMMAND |
Silent Lock* |
| BUTTON |
|
| DESCRIPTION |
Disables the vehicle’s horn and alarm siren. |
| CONFIRMATION |
• 1 chirp, display  and  |
SILENT UNLOCK*
| COMMAND |
Silent Unlock* |
| BUTTON |
|
| DESCRIPTION |
Disables the vehicle’s horn and alarm siren. |
| CONFIRMATION |
• 2 chirps, display and |
VALET MODE ON/OFF
| COMMAND |
Valet Mode ON/OFF |
| BUTTON |
 |
| DESCRIPTION |
Turns off remote start and security features when servicing your vehicle or valet parking. Keyless entry features remains functional. |
| CONFIRMATION |
• ON: 1 chirp, display 
• OFF: 2 chirps, disappears. |
RUNTIME EXTEND
| COMMAND |
Runtime Extend |
| BUTTON |
|
| DESCRIPTION |
Seamlessly extends your engine runtime without restarting your vehicle. |
| CONFIRMATION |
• 4 chirps, display runtime minutes ex: 
|
MUTE ON/OFF
| COMMAND |
Mute ON/OFF |
| BUTTON |
|
| DESCRIPTION |
Disables the vehicle’s horn and alarm siren even when alarm is triggered. Remote will still receive alarm notification. |
| CONFIRMATION |
• ON: 1 chirp.
• OFF: 2 chirps, display
|
IGNITION LOCK ON/OFF
PASSIVE LOCK ARM ON/OFF
| COMMAND |
Passive Lock & Arm ON/OFF |
| BUTTON |
|
| DESCRIPTION |
Automatically locks and arms your vehicle 60 seconds after you unlock it. |
| CONFIRMATION |
• ON: 1 chirp, display  for 3 seconds.
• OFF: 2 chirps, display  for 3 seconds. |
TURBO ON/OFF
| COMMAND |
Turbo ON/OFF |
| BUTTON |
|
| DESCRIPTION |
Cools down your turbo before turning the engine off. Programmable runtime from 30 seconds to 4 minutes. |
| CONFIRMATION |
• ON: 1 chirp, display 
• OFF: 2 chirps, disappears. |
WEATHER START ON/OFF
| COMMAND |
Weather Start ON/OFF |
| BUTTON |
|
| DESCRIPTION |
Sets your vehicle to automatically remote start every 2, 3 or 4 hours (programmable) or from a temperature sensor sold separately. |
| CONFIRMATION |
• ON: 1 chirp, display 
• OFF: 2 chirps, disappears. |
QUERY REMOTE TECHNOLOGY
| COMMAND |
Query Remote Technology |
| BUTTON |
|
| DESCRIPTION |
Shows the remote technology on LCD for 3 seconds. |
| CONFIRMATION |
• Displays remote technology (ex: AM =  / FM =  / SST =  ) for 3 seconds.
|
QUERY REMOTE FIRMWARE VERSION
| COMMAND |
Query Remote Firmware Version |
| BUTTON |
|
| DESCRIPTION |
Shows the firmware version on LCD for 3 seconds. |
| CONFIRMATION |
• Displays firmware version ex:  for 3 seconds. |
LOCK REMOTE
| COMMAND |
Lock Remote |
| BUTTON |
|
| DESCRIPTION |
Disables all functions on your remote. |
| CONFIRMATION |
• ON: 1 chirp + LCD backlight flash 1 time.
• On button press: 6 chirps + 6 times and remote LCD backlight flashes.
|
UNLOCK REMOTE ON/OFF
| COMMAND |
Unlock Remote ON/OFF |
| BUTTON |
|
| DESCRIPTION |
Enables all functions on your remote. |
| CONFIRMATION |
• ON: 2 chirps + LCD backlight flash 2 times.
|
NO BEEP ON TAKEOVER
| COMMAND |
No beep on takeover |
| BUTTON |
|
| DESCRIPTION |
It will not beep on takeover |
| CONFIRMATION |
• ON: 1 chirp
• OFF: 2 chirps |
INVERT FUNCTION OF QUERY REMOTE START
| COMMAND |
Invert function of query remote start |
| BUTTON |
|
| DESCRIPTION |
It will invert function of query remote start |
| CONFIRMATION |
• ON: 1 chirp
• OFF: 2 chirps |
MUTE REMOTE ON/OFF
| COMMAND |
Mute Remote ON/OFF |
| BUTTON |
|
| DESCRIPTION |
Disables the chime when pressing any button on your remote. |
| CONFIRMATION |
• Chirp OFF: 2 chirps, display for 3 seconds.
• Chirp ON: 1 chirp, displays for 3 seconds. |
REMOTE SETTINGS
| COMMAND |
Remote Settings |
| CONTROLS |
• Press to enter the remote settings.
• Press to go to the NEXT option.
• Press to increase the value or to set the option to ON.
• Press to decrease the value or to set the option to OFF.
|
| OPTIONS |
1. Set the clock’s hours
2. Set the clock’s minutes
3. Set the timer/alarm based on the clock
4. Set the backlight to ON/OFF
5. Set the vibration to ON/OFF
6. Set the chirp to ON/OFF
7. Exit the remote settings
|
BATTERY LEVEL
| COMMAND |
Battery Level |
| DESCRIPTION |
Shows the remote battery level. |
| DISPLAY |
 75% – 100%
 50% – 75%
 25% – 50%
 0% – 25%
|
